TECH 462 –Industrial Safety Engineering- accident prevention plan

complete an accident prevention plan for a company
You
are to complete an accident prevention plan for a company. The Complete
list of content/sections to be covered is listed in the contents
section below. The company profile, which you need to match to the
content/sections, is listed in the company profile section below. The
expected finished length of this assignment is from 75 to 100 pages.

A .docx” href=”https://canvas.ewu.edu/courses/943510/files/30083431/download?wrap=1″>template has been provided to help you organize your Accident Prevention Plan.

Formatting:

Body Text Size: All
of the body text in this assignment needs to be set in 12-point size.
Please resist the temptation to mix and match point sizes.

Header Text Size: All
of the header text in this assignment can be set in 14-point or
16-point size. Please resist the temptation to mix and match point
sizes. Pick your text size and use it consistently throughout the
assignment.

Double Spacing: For
this assignment select all of your text and set it for double spacing.
This includes the headers and body of your work. This allows space for
marking up or making notes while I am reviewing what you have written.
This also helps to make the document more readable. (The exception to
the double spacing is the text on the title page.)

Page Margins: Set
your pages to one-inch margins. One-inch margins mean one (1”) on all
sides. The only text that ends up on the outside of the one-inch margin
is the page number.

Title Page: This page will contain the title, “Accident Prevention Plan”, and the name block. Place the title in the center, right to left and about one-third the way down the page.

Name Block: Place the name block in the center, right to left and about two- thirds the way down the page. Put your name first, then the class title and then the date. Example:

Your Name
TECH 462 –Industrial Safety Engineering

Spelling/Grammar Checking: Remember
to do your spelling and grammar checking before turning your
assignments in. When doing the spelling/grammar checking keep in mind
that some words such as mush and must, woods and words, or here and cow,
will not be caught by either check. To correct these problems, you will
need to proofread your work.

Page Numbers: Any
assignment that has more than one page, needs to have page numbers on
it. Please place your page numbers on the bottom of the page. In MS
Word, use the footer selection and place the page number in the bottom center orbottom right of the page.

Content:(Major Contents/Sections Check-Off List)

___ 1. Title Page
___ 2. Table of Contents Page
___ 3. Divider Pages
___ 4. Introduction
A. Purpose & Intentions
B. Company Presidents Statement
___ 5. Management Responsibilities
A. Manager Responsibilities
B. Supervisors Responsibilities
___ 6. Employee Orientation
A. How and When
B. Emergency Action Plan
C. Emergency Shutdown Procedures
___ 7. Injury and Illness Procedures
A. Procedures
B. Record Keeping
C. Supervisor Responsibilities
D. Report Form
___ 8. Incident/Accident Investigation Procedures
A. Procedure Steps
B. Worksheet Form
C. Incident/Accident Table
___ 9. Safety Guidelines
A. Guidelines
B. Equipment Specific
C. Individual Specific
___ 10. Safety Disciplinary Policy

___ 11. Safety Awareness Program
A. Safety Committee
B. Safety Meetings
C. Safety Training and Forms
D. Safety Award Program
___ 12. Appendices
A. MSDS
B. State & Federal Posters
C. OSHA Forms and Instructions

Company Profile:

Company Size: 350 employees

Company Product: Custom manufacture of industrial hardened computers (CPU, Keyboards, etc)

Processes at factory include:
Circuit board assembly
Circuit board production
Metal case production
Plastic forming processes
Plastic pellet storage and transport to machines
Shipping/receiving

Specific equipment in factory:
Air compressor
Conveyors
Electric forklift
Hoists
Metal punch presses
Metal bending and cutting machines
Plastic injection molding machines
Plastic sheet forming equipment
Shearing machine for sheet plastic

Safety Promotion Budget: $8,000 annually