Warning: include(/home/smartonl/royalcustomessays.com/wp-content/advanced-cache.php): failed to open stream: No such file or directory in /home/smartonl/royalcustomessays.com/wp-settings.php on line 95

Warning: include(): Failed opening '/home/smartonl/royalcustomessays.com/wp-content/advanced-cache.php' for inclusion (include_path='.:/opt/alt/php56/usr/share/pear:/opt/alt/php56/usr/share/php') in /home/smartonl/royalcustomessays.com/wp-settings.php on line 95
Design and Develop a parking management system – RoyalCustomEssays

Design and Develop a parking management system

Contrast the challenges of negotiating in the workplace and outside the workplace.
November 9, 2022
Application of finite elements in aerospace structures
November 10, 2022
TEST PROGRAM IN LOGIXPRO AND MAKE VIDEO OF PROCESS

 
Develop parking garage


 
College of Engineering and Information Sciences
 
 
Objectives
•	Design and Develop a parking management system
•	Develop a counter mechanism for quantity of cars in the parking lot
•	Develop logic for status conditions of the system
Project description in your own words 
This project is a parking management system, the objective of the system is to indicate the number of vehicles present at the parking at any given time therefore providing a staus on whether the parking is full or almost full or empty. The management takes place at the entry and exit of the parking as this is the point vehicles enter or leave the area being monitored. 
Describe your strategy for a solution to the project. What needs to be done? Please provide a flow chart, a bulleted list, or a table to describe your strategy
To start or stop the process a NO push button is pressed and to stop a normally closed push button is pressed
In addition a counter needs to be used to monitor the number of vehicles currently in the parking at any given point. The data from this counter will also be used to control the status lights i.e. red when completely full, yellow when almost full, and green when many parking spaces are available. The status lights will be activated using an AND/OR gate in the system
The process will be as follows
Place Order